I would like to replace the mockup template for my own pictures, but I didn't find an easy way to do that.
This is the picture of the mockup:
Please, download the free .PSD mockup here to try it:
https://www.freepik.com/free-psd/book-c ... 277414.htm
I tried two ways:
1) I made an image of the same size of the book's cover and used the "Transform" feature so I could adjust the image into the book. The cover image was nice but it was not so good, because the book is 3D and some parts are rounded and there are curves at the left and bottom sides.
2) I replaced the original image from the layer by mine and the curve issue was solved. Now I got a problem with the image, since the letters were not transformed. The new cover fit 100% as the original one, but the information at the cover became distorted:
Is there a way to just replace the picture and keep the aspect ratio?
How could I bend the sides of the cover?
Thanks.
How could I change the pictures of a Book Mockup like that?
2020-07-24 02:17:41
2020-08-11 14:31:53
Hey there, apologies for the late reply! Here's what I'd do in this case:
1. Select the layer called "design here 1"
2. Choose Format > Image > Replace Image (or press the Shift-Command-R keyboard shortcut)
3. Find the cover design image and use it to replace the other layer
4. With that same layer still selected, choose Format > Effects > Other > Perspective Transform
5. Adjust the perspective of the layer using the effect handles to match the perspective of the book
This way, the mask will still be applied to the image and the perspective will match the book. There won't be any 'bend' in the image, but it's quite slight and shouldn't really be visible. You can also use the same basic technique to replace the other book images in the mockup.
Hope that helps!
1. Select the layer called "design here 1"
2. Choose Format > Image > Replace Image (or press the Shift-Command-R keyboard shortcut)
3. Find the cover design image and use it to replace the other layer
4. With that same layer still selected, choose Format > Effects > Other > Perspective Transform
5. Adjust the perspective of the layer using the effect handles to match the perspective of the book
This way, the mask will still be applied to the image and the perspective will match the book. There won't be any 'bend' in the image, but it's quite slight and shouldn't really be visible. You can also use the same basic technique to replace the other book images in the mockup.
Hope that helps!
2020-08-13 10:24:45
Hi!
Thank you!
It seems this will work (I did a short test).
I could move the letters without move the cover, but if I move the handles a bit more, the cover moves as well.
Is there any tip to move the letters without move the cover? The cover is the image I have replaced.
Thanks.
Thank you!
It seems this will work (I did a short test).
I could move the letters without move the cover, but if I move the handles a bit more, the cover moves as well.
Is there any tip to move the letters without move the cover? The cover is the image I have replaced.
Thanks.